G-FLD
Laboratory Fermentor
Dual system
– Vessels Capacity(L): 1,2,3,5,7,10
– Temp. Control Range(℃): 8~70
Product Features
- Optimized for high-density microbial growth.
- Available in a wide range of vessels, including single, double, or bowl types, ranging from 1L to 10L.
- Four peristaltic pumps, each individually controlled for pH, DO, anti-foam, and feeding.
- Intuitive control via a 12″ Android tablet for ease of operation.
- Accurate PID temperature control to maintain optimal growth conditions.
- Dual-batch operation: Allows for simultaneous cultivation of two separate batches with independent control, enabling comparative experiments under different conditions.
System Configuration, G-FLD
Main Control System
Applications
• Microbial fermentation
• Cell cultivation Production of biomass
• Extracellular metabolites
• Intracellular components
• Cell cultivation Production of biomass
• Extracellular metabolites
• Intracellular components
| G-FLS | ||
| Controller | Display | 12″ Android Tablet |
| Feeding Pumps | Max. 4 (14 rpm) | |
| Dimension (W x D x H, mm) | 310 x 450 x 670 | |
| Weigh | 17 kg | |
| Agitation | RPM range | 100 ~ 1,200 rpm |
| Motor | DC motor | |
| Temp. Control Range (sensor) | 8 ~ 70 ℃ | |
| pH Control Range (sensor) | 0 ~ 14 | |
| DO Control Range (sensor) | 0 ~ 100 % | |
| Anti Foam Sensing | Conductivity type | |
| Peristaltic Pump | 114ST/DV(1~400rpm) | |
| Ratings | 220~230V, 50/60 Hz, Single phase | |
| Power requirement | 850 VA | |
Availability of Vessel Types and Sizes
|
Vessel Type
|
1L
|
2L
|
3L
|
5L
|
7L
|
10L
|
|
Single flat
|
●
|
●
|
●
|
●
|
●
|
●
|
|
Single round
|
●
|
●
|
●
|
●
|
●
|
●
|
|
Double
|
–
|
●
|
●
|
●
|
–
|
–
|
|
Bowl type
|
–
|
–
|
–
|
–
|
●
|
●
|
|
Controller and Accessories |
|
| Cat. No. | Description |
| FE1002 | LiFlus G-FL controller, without pumps and air flow meter |
| FE3081 | Peristaltic pump (upto 4 pumps can be installed on one controller), 14 rpm |
| FE3051 | Air flow meter (rotameter), 200~2,500 cc/min for 1.5L (w.v.1L) |
| FE3052 | Air flow meter (rotameter), 200~2,500 cc/min for 3L (w.v.2.1L) |
| FE3053 | Air flow meter (rotameter), 0.5~ 5L/min for 5L (w.v.3L) |
| FE3054 | Air flow meter (rotameter), 1~ 10L/min for 7L (w.v.5L) or 10L (w.v.7L) |
| FE3055 | Air flow meter (rotameter), 1~25L/min for 14L (w.v.10L) |
| FE2106 | Air compressor (air flow 20 L/min, pressure 0.1kgf/cm^2, input 18 W for 1.5~14L |
|
Single Vessel, borosilicate glass vessel with top SUS plate pH, DO, antifoam, thermo, inoculation, sampling, and 4 feeding ports, silicone connecting tubes and cold finger (over 3L) |
|
| Cat. No. | Description |
| FE1102 | Single vessel 1.5L, vessel (I.D 115 mm, V.H 135 mm, 1:1.2), top plate (180 D/mm, SUS) |
| FE1103 | Single vessel 3L, vessel (I.D 133 mm, V.H 220 mm, 1:1.7), top plate (220 D/mm, SUS) |
| FE1104 | Single vessel 5L, vessel (I.D 170 mm, V.H 220 mm, 1:1.3), top plate (220 D/mm, SUS) |
| FE1105 | Single vessel 7L, vessel (I.D 170 mm, V.H 310 mm, 1:1.8), top plate (220 D/mm, SUS) |
| FE1106 | Single vessel 10L, vessel (I.D 190 mm, V.H 355 mm, 1:1.8), top plate (220 D/mm, SUS) |
| FE1107 | Single vessel 14L, vessel (I.D 190 mm, V.H 355 mm, 1:1.8), top plate (220 D/mm, SUS) |
|
Single Round Vessel, borosilicate glass vessel with SUS vessel supporter and top plate pH, DO, antifoam, thermo, inoculation, sampling, and 4 feeding ports, silicone connecting tubes and cold finger (over 3L) |
|
| Cat. No. | Description |
| FE1131 | Single round vessel 2L, vessel (I.D 115 mm, V.H 135 mm, 1:1.2), top plate (180 D/mm, SUS) |
| FE1132 | Single round vessel 3L, vessel (I.D 133 mm, V.H 220 mm, 1:1.7), top plate (220 D/mm, SUS) |
| FE1133 | Single round vessel 5L, vessel (I.D 170 mm, V.H 220 mm, 1:1.3), top plate (220 D/mm, SUS) |
| FE1134 | Single vessel 7L, vessel (I.D 170 mm, V.H 310 mm, 1:1.8), top plate (220 D/mm, SUS) |
|
Double Vessel, borosilicate glass vessel with SUS vessel supporter and top plate pH, DO, antifoam, thermo, inoculation, sampling, and 4 feeding ports, silicone connecting tubes and cold finger (over 3L) |
|
| Cat. No. | Description |
| FE1112 | Double vessel 3L, vessel (I.D 130 mm, V.H 220 mm, 1:1.7), top plate (220 D/mm, SUS) |
| FE1113 | Double vessel 5L, vessel (I.D 145 mm, V.H 300 mm, 1:1.2), top plate (220 D/mm, SUS |
| FE1114 | Double vessel 7L, vessel (I.D 160 mm, V.H 330 mm, 1:1.7), top plate (220 D/mm, SUS) |
| FE1115 | Double vessel 10L, vessel (I.D 230 mm, V.H 350 mm, 1:1.7), top plate (220 D/mm, SUS) |
| FE1116 | Double vessel 14L, vessel (I.D 270 mm, V.H 375 mm, 1:1.7), top plate (220 D/mm, SUS) |
|
Bowl Type Vessel, borosilicate glass double vessel with bowl type SUS base and top SUS plate pH, DO, antifoam, thermo, inoculation, sampling, and 4 feeding ports, silicone connecting tubes and cold finger (over 3L) |
|
| Cat. No. | Description |
| FE1121 | Bowl vessel 10L, vessel (I.D 190mm, V.H 355mm, 1:1.8), top plate (220 D/mm, SUS) |
| FE1122 | Bowl vessel 14L, vessel (I.D 190mm, V.H 500mm, 1:2.6), top plate (220 D/mm, SUS) |
|
Heating and Cooling Apparatus |
|
| Cat. No. | Description |
| FE1151 | Heating plate with water in/out port for single vessel, 1.5L (210 x 210 x 40 mm) |
| FE1152 | Heating plate with water in/out port for single vessel, 3L (220 x 220 x 40 mm) |
| FE1153 | Heating plate with water in/out port for single vessel, 5L, 7L (250 x 250 x 40 mm) |
| FE1154 | Heating plate with water in/out port for single vessel, 10L (280 x 280 x 40 mm) |
| FE1161 | Heating blanket for single round vessel, 2L |
| FE1162 | Heating blanket for single and single round vessels, 5L |
| FE1163 | Heating blanket for single and single round vessels, 7L |
| FE1164 | Heating blanket for single vessel, 10L |
| FE2001 | 6L chiller for single vessel, 3L, 5L |
| FE2002 | 8L chiller for single vessel, 7L |
| FE2003 | 12L chiller for single vessel, 10L |
|
Motor for Agitation |
|
| Cat. No. | Description |
| FE1201 | DC motor for 1.5~7L vessel (60 W, DC 24V 3A, 100~850 rpm) |
| FE1202 | DC motor for 10~14L vessel (150 W, DC 24V 8A, 100~850 rpm) |
|
Impeller for Agitation, SUS |
|
| Cat. No. | Description |
| FE1402 | Rushton turbine impeller (O.D. 60 mm) for double 5L vessel |
| FE1403 | Rushton turbine impeller (O.D. 80 mm) for single 5L, 7L, double 7L vessels |
| FE1407 | Pitched-paddle impeller (O.D. 65 mm) for single 1.5L, 3L, double 3L vessels |
| FE1411 | Pitched-paddle impeller (O.D. 80 mm) for single 5L, 7L, double 5L vessels |
| FE1412 | Pitched-paddle impeller (O.D. 100 mm) for 10L, 14L vessels |
| FE1413 | Pitched-paddle impeller (O.D. 100 mm) for 10L, 14L vessels |
| FE1421 | Marine-blade impeller (O.D. 65 mm) for single 1.5L, 3L, double 3L vessels |
| FE1422 | Marine-blade impeller (O.D. 80 mm) for double 5L Vessels |
| FE1423 | Marine-blade impeller (O.D. 100 mm) for single 5L, 7L, double 7L, bowl 10L, 14L vessels |
| FE1431 | Varied impeller (O.D. 65 mm) for single 1.5L, 3L, double 3L vessels |
| FE1432 | Varied impeller (O.D. 80 mm) for single 5L, 7L, double 5L vessels |
| FE1433 | Varied impeller (O.D. 100 mm) for 10L, 14L vessels |
|
Foam Breaker, SUS |
|
| Cat. No. | Description |
| FE1501 | Foam breaker (O.D. 75 mm) for single 1.5L, 3L, double 3L vessels |
| FE1502 | Foam breaker (O.D. 90 mm) for single 5L, 7L, double 5L vessels |
| FE1503 | Foam breaker (O.D. 110 mm) for 10L, 14L vessels |
|
Sparger, SUS |
|
| Cat. No. | Description |
| FE4011 | Ring type sparger, removable |
| FE4012 | Linear type sparger, removable |
| FE4013 | Micro spareger with 20 μm holes |
|
Condenser, SUS |
|
| Cat. No. | Description |
| FE1701 | Standard condenser |
| FE1703 | Big size condenser for 10L, 14L vessels |
|
Sensors |
|
| Cat. No. | Description |
| FE153X | pH electrode, length 120, 225, 325, or 425 mm |
| FE154X | Cable for pH Electrode, 1 m or 3 m |
| FE157X | DO (dissolved oxygen) electrode, length 120, 220, 320, or 420 mm |
| FE158X | Cable for DO electrode, 1 m or 3 m |
| FE163X | Temperature sensor, Length 160, 220, 260, 320, 360, 510 mm |
| FE1601 | Anti foam electrode, L100 DIA7 PORT 12 for 1.5L Vessel |
| FE1602 | Anti foam electrode, L150 DIA7 PORT 12 for 3, 5, 7, 10, 14L Vessels |
| FE161X | Cable for anti foam electrode, length 1 m or 1.5 m |
|
Reagent Bottle, Pyrex, 0.2 μm PTFE Filter (Ø 25mm) included |
|
| Cat. No. | Description |
| FE1801 | 250 mL reagent bottle, 4 ea/set |
| FE1802 | 500 mL reagent bottle, 4 ea/set |
| FE1803 | 1,000 mL reagent bottle, 4 ea/set |